关于ZEMAX-API analysis分析接口 C++一段代码报错的请教

sakura

最近学习zemax api，
https://mp.weixin.qq.com/s/AdjUB2yT1i_Pp7C9yc2MlA
上述链内容是一段zemax api analysis 分析代码，代码是C#写的，此为前提；
然后我用C++跟着写了一遍，但是编译报错；请各位专家指点迷津；

// Add your custom code here...

    IOpticalSystemPtr TheSystem = TheApplication->PrimarySystem;

    /*cout << "my code begin running..." << endl;*/

    ILensDataEditorPtr TheLDE = TheSystem->LDE;

    ILDERowPtr surf6 = TheLDE->GetSurfaceAt(6);

    double *MTFs30 = new double[201];

    double *MTFs40 = new double[201];

    double  *MTFs50 = new double[201];

    double *surf6Thi = new double[201];

    IMeritFunctionEditorPtr TheMFE = TheSystem->MFE;

    IMFERowPtr Operand1 = TheMFE->AddOperand();

    Operand1->ChangeType(MeritOperandType_MTFS);

    IEditorCellPtr Op1Samp = Operand1->GetOperandCell(MeritColumn_Param2);

    Op1Samp->IntegerValue = 2;

    IEditorCellPtr Op1Freq = Operand1->GetOperandCell(MeritColumn_Param4);

    Op1Freq->DoubleValue = 30;

    IMFERowPtr Operand2 = TheMFE->AddOperand();

    Operand2->ChangeType(MeritOperandType_MTFS);

    IEditorCellPtr Op2Samp = Operand2->GetOperandCell(MeritColumn_Param2);

    Op1Samp->IntegerValue = 2;

    IEditorCellPtr Op2Freq = Operand2->GetOperandCell(MeritColumn_Param4);

    Op2Freq->DoubleValue = 40;

    IMFERowPtr Operand3 = TheMFE->AddOperand();

    Operand3->ChangeType(MeritOperandType_MTFS);

    IEditorCellPtr Op3Samp = Operand3->GetOperandCell(MeritColumn_Param2);

    Op3Samp->IntegerValue = 2;

    IEditorCellPtr Op3Freq = Operand3->GetOperandCell(MeritColumn_Param4);

    Op3Freq->DoubleValue = 50;

    double step = 0.01;

    surf6->Thickness = surf6->Thickness - 100 * step;

    for (int i = 0; i < 201; i++) {

        surf6->Thickness = surf6->Thickness + step;

        surf6Thi = surf6->Thickness;

        //quick focus

        IQuickFocusPtr quickFocus = TheSystem->Tools->OpenQuickFocus();

        QuickFocusCriterion QuickFocusCriterion_SpotSizeRadial;

        quickFocus->UseCentroid = true;

ISystemToolPtr baseTool = quickFocus;

        baseTool->RunAndWaitForCompletion();

        baseTool->Close();

        TheMFE->CalculateMeritFunction();

        MTFs30=Operand1->Value;

        MTFs40 = Operand2->Value;

        MTFs50 = Operand3->Value;

    }

    //plot the result

    IUser2DLineDataPtr LinePlot;

    //cout << "my code running to the plot file...." << endl;

    LinePlot->AddSeries("MTF 30 cycles/mm", ZemaxColor_Color1, 201, MTFs30);

    LinePlot->AddSeries("MTF 40 cycles/mm", ZemaxColor_Color2, 201, MTFs40);

    LinePlot->AddSeries("MTF 50 cycles/mm", ZemaxColor_Color3, 201, MTFs50);

    LinePlot->XLabel = "surface 6 thickness [mm]";

    LinePlot->YLabel = "MTF";

    delete[] MTFs30;

    delete[] MTFs40;

    delete[] MTFs50;

    delete[] surf6Thi;

编译报错图片：

sakura

还有一段C#代码，始终没找到用C++正确的写法；
按照帮助文件里面的内容，make2dplot函数应该是有三个参数的；
但是我要是写成
IUser2DLineDataPtr LinePlot = iUserAnalysisData：：Make2DLinePlot("MTF VS Surface6 thickness",201,surf6Thi),也会报错，请各位专家指点；